PT. Bopana Arga Prima Jaya

sql
Flow Cup Viscometer PCE-128 Series
Flow Cup Viscometer PCE-128 Series
Flow Cup Viscometer PCE-128 Series
Hover to Zoom

04 Mar 2020
United Kingdom
1 Pieces
IDR CALL

Spesifikasi

PCE-128 Series Flow Cup Viscometer
manufacturer calibrated / anodized aluminum / ISO / ASTM standardization

The PCE-128 ISO / ASTM viscometer or ISO / ASTM Flow Cup Viscometer uses gravity to measure the flow rate of a liquid. Under ideal conditions, flow rate is proportional to kinematic viscosity. Thus, an ISO / ASTM cup is used to determine the kinematic viscosity of fluids. The structure of an ISO / ASTM Flow Cup Viscometer is standardized according to BS EN ISO 2431 / ASTM D5125.

Basic operation
Cover the holes at the bottom of the orifice and pour in the liquid to be measured. Make sure that the Flow Cup Viscometer is completely filled. Use the glass plate to scrape off any excess liquid from the edge of the flow cup. Uncover the holes at the bottom of the orifice. Negative pressure will keep the liquid in the cup until you're ready to begin measuring. Active a stopwatch (not included) while simultaneously removing the glass plate from the cup horizontally. As soon as the flow is interrupted for the first time, stop the watch and write down the time.

Note: When using a Flow Cup Viscometer, it is very important to make sure that the instrument is cleaned thoroughly after each measurement, as residue in the orifice and cup can jeopardize the accuracy of future measurements. Scratches also can cause inaccurate results.

***Test stand sold separately. See also for recommendations.***


Designed for use with Newtonian and near-Newtonian liquids, this viscosity cup series features:

- Orifice diameters (Ø) of 3 mm, 4 mm, 5 mm, 6 mm, or 8 mm / 0.12 in, 0.16 in, 0.20 in, 0.24 in, or 0.31 in
- Viscosity ranges of 7 ... 42, 34 ... 135, 91 ... 326, 188 ... 684 or 600 ... 2,000 cSt / mm²/s
- Flow times of 25 ... 150 or 30 ... 100 seconds (s)
- Anodized aluminium cup with stainless steel orifice
- Overflow gutter for preventing faulty measurements
- Factory / manufacturer calibration certificate

alat laboratorium umum

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Minta Penawaran
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot